Sanistar C 102 W sewage lifting unit

Sewage lifting unit_x000d_ Sanistar C 102 W_x000d_ _x000d_ Use:_x000d_ Pumping of sewage and faeces,_x000d_ including those with coarse and fibrous components._x000d_ For draining rooms below the backflow level_x000d_ where wastewater is produced,_x000d_ e.g. from toilets, washbasins, showers,_x000d_ according to DIN 1986._x000d_ _x000d_ Collection tank:_x000d_ Non-rotting, gas- and odor-tight plastic container. Inlets: DN 100 horizontal, 180 mm height DN 100 horizontal, 250 mm height DN 100 vertical, DN 40 vertical DN 150 horizontal, DN 150 vertical._x000d_ Pressure connection: flange DN 80 and_x000d_ flexible adapter DN 80/Ø 89._x000d_ Soft-seated non-return valve integrated in pressure connection_x000d_ Vent connection: DN 70 vertical._x000d_ Connection for diaphragm hand pump: R 1" female thread._x000d_ Cleaning opening with screw cap_x000d_ _x000d_ Control:_x000d_ Pneumatic level control with_x000d_ Back pressure control. Electronically_x000d_ controlled pump run-on_x000d_ prevents sludge deposits and_x000d_ clogging. Electronic control unit_x000d_ for controlling and monitoring all_x000d_ important operating functions_x000d_ with reporting of any faults that may occur. Motor protection with temperature monitoring of the winding. Optical fault display. Alarm signal via built-in buzzer. Potential-free collective fault message can be retrofitted as an option, see accessories._x000d_ Direction of rotation control display._x000d_ - Query of operating hours,_x000d_ switching cycles, maintenance interval,_x000d_ abnormal operating conditions_x000d_ - Change in the switching levels._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of pumping medium:_x000d_ 40 C, briefly up to 60 C._x000d_ _x000d_ Design:_x000d_ Flood-proof single lifting unit_x000d_ with control unit, collection tank and_x000d_ a pump, ready for connection._x000d_ _x000d_ Pump design:_x000d_ Pump chamber integrated in the collection tank, vertical pressure connection DN 80. Vortex impeller with a free passage of 45.00 mm. Operating mode: intermittent operation. Shaft seal: 3-fold radial seal Mode of operation: Intermittent._x000d_ _x000d_ Shaft seal:_x000d_ 3-fold radial seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ Roller bearing._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with 2-pole winding._x000d_ Insulation class of the winding F,_x000d_ Protection class IP68. Thermal sensors in the_x000d_ thermal sensors for temperature monitoring_x000d_ in the winding._x000d_ _x000d_ Materials:_x000d_ Collection container: polyethylene_x000d_ Impeller: Cast steel GS52_x000d_ Pump pressure cover: Plastic PP-GF_x000d_ Motor housing cover: Plastic PP-GF_x000d_ Motor housing: Stainless steel 1.4301_x000d_ Motor shaft: Stainless steel 1.4104_x000d_ Swing check valve housing: Plastic PP-GF_x000d_ RSK pressure cap: Gray cast iron EN-GJL-250_x000d_ Mechanical connecting parts: Stainless steel_x000d_ Elastomers: NBR_x000d_ Shaft seals: NBR_x000d_ upper bearing: grooved ball bearing_x000d_ lower bearing: grooved ball bearing_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 28.00 m³/h_x000d_ Delivery head Hmax: 9.50 m_x000d_ Number of pumps: 1.00_x000d_ Power P1: 1.20 kW_x000d_ Power P2: 0.85 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Rated current: 5.30 A_x000d_ Speed: 2900.00 1/min_x000d_ Starting type: Direct_x000d_ Tank volume: 70.00 L_x000d_ Pressure connection: DN 80_x000d_ Weight: 32.57 kg_x000d_ Explosion-proof: no_x000d_ Cutting mechanism: no_x000d_ _x000d_ Dimensions: Width: 660.00 mm Depth: 590.00 mm Height: 515.00 mm Connection cable: H07RN8-F PLUS - 4G1.5_x000d_ length of connection cable: 4.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Tank with pump, soft-sealing_x000d_ Non-return valve,_x000d_ pressure connection with flange DN 80_x000d_ and DN 80/DN 100 elastic adapter_x000d_ with clamps. Elastic connecting pieces_x000d_ for inlet DN 100 and_x000d_ Ventilation DN 70 with clamps._x000d_ Pneumatic level switch._x000d_ Electronic control unit_x000d_ Connecting cable with plug._x000d_ _x000d_ Make: HOMA