Sewage ejection pump Unterflur Saniquick UFT100 - CH250

Sewage water lifting unit underfloor_x000d_ Saniquick UFT100 - CH250_x000d_ _x000d_ Use:_x000d_ Pumping of domestic and chemically_x000d_ aggressive waste water. Salt water_x000d_ (up to 15%) from softening systems and_x000d_ condensate from condensing boilers, as well as_x000d_ clean or dirty water,_x000d_ also with solids content._x000d_ _x000d_ Collection shaft:_x000d_ Buoyancy-proof plastic shaft,_x000d_ container volume 120.00 l, usable volume 66 l,_x000d_ with 3 inlet nozzles DN 100. Nozzle_x000d_ DN 70 for ventilation and_x000d_ Cable entry. Height-adjustable_x000d_ compensating frame for adapting the_x000d_ cover plate to the floor level._x000d_ Cover plate with floor drain and_x000d_ odor trap, can be used on both sides_x000d_ as a drain grate or tile frame._x000d_ Frame and plate can be rotated to align_x000d_ with the tiled surface._x000d_ Screw connection and pressure pipe_x000d_ to the pumps in the container,_x000d_ including non-return valve._x000d_ Shaft extension up to max. 500 mm possible using standard KG pipe (DN400). Can be used in groundwater-prone areas. The water level can be up to 3 m above the top edge of the container Top edge of the container._x000d_ _x000d_ Control:_x000d_ Electronic control unit_x000d_ for controlling and monitoring_x000d_ all important operating functions._x000d_ Pneumatic level control with_x000d_ Dynamic pressure control. Change of pumps_x000d_ after each switching cycle. Connection_x000d_ of the second pump in case of peak load. In case of_x000d_ failure of a pump, automatic_x000d_ switchover to the reserve pump._x000d_ Overload protection with motor protection relay. Optical fault display. Alarm signal through built-in buzzer. Potential-free collective fault message. Configuration via free HOMApp possible. Communication between HOMApp and control via Bluetooth._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of the pumped medium:_x000d_ 35 C._x000d_ _x000d_ Design:_x000d_ Ready-to-connect installation unit_x000d_ with wastewater collection shaft_x000d_ as a double lifting unit with_x000d_ two pumps and control_x000d_ _x000d_ Pump design: Two single-stage submersible drainage pumps. Pressure connection 1 1/4 inch (32). Open multi-vane wheel with a free passage of 10.00 mm._x000d_ _x000d_ Mode of operation: intermittent._x000d_ _x000d_ Shaft seal:_x000d_ combination of shaft seal ring_x000d_ and SIC mechanical seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearing_x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with a 2-pole winding. Insulation class of the winding B, protection class IP68. Thermal sensors in the thermal sensors for temperature monitoring in the winding Materials: Collection container: PE Extension spindle: plastic PP-GF Suction sieve: plastic PP-GF Impeller: plastic PP-GF Motor housing: highly resistant stainless steel Outer casing: plastic PP-GF_x000d_ Motor shaft: highly resistant stainless steel_x000d_ Mechanical connecting parts: rustproof stainless steel_x000d_ Elastomers: NBR_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 12.00 m³/h Head Hmax: 8.00 m Number of pumps: 2.00 Power P1: 0.55 kW Power P2: 0.26 kW Frequency: 50 Hz_x000d_ voltage: 230 V_x000d_ current type: 1.00 Ph_x000d_ nominal current: 2.50 A_x000d_ speed: 2850.00 1/min_x000d_ Starting type: Direct Tank volume: 120.00 L Pressure connection: 1 1/4 inch (32) Weight: 23.41 kg Explosion-proof: no Dimensions: Width: 590.00 mm Depth: 585.00 mm Height Dimensions: Width: 590.00 mm Depth: 585.00 mm Height: 991.00 mm Connection cable: H07RN-F - 3G1 Length of connection cable: 10.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Collection shaft with cover, 2 pumps_x000d_ with non-return valve and pipework,_x000d_ 10 m connection cable, PCM control unit with_x000d_ pneumatic level control and_x000d_ alarm message._x000d_ _x000d_ Make: HOMA