Clage small instantaneous water heater MBH 7 6.5kW - 400V
The hydraulically controlled small instantaneous water heater, pressure-resistant design from Clage, offers you a perfect hot water supply for your hand basin with its effective bare-wire heating system. Thanks to its small size, it is perfectly suited to all wash basins. Since the water is heated immediately during the flow, the Clage small water heater is very energy efficient.
- Dimensions (width x height x depth): 13.5 x 18.6 x 8.7 cm
- Hydraulically controlled E-mini instantaneous water heater (undersink unit) for supplying a washbasin
- The heating switches on automatically as soon as water flows through the device
- New flow technology for an optimal water jet with economical water consumption
- Saves up to 85% energy compared to conventional small storage heaters
- Effective and maintenance-friendly IES® bare-wire heating system with replaceable heating cartridge
- New flow technology for an optimal water jet with economical water consumption
- Pressure-resistant design
- Removable panel for access to the central cover screw and water volume adjustment
- Special aerator with flow regulator for use in M22/M24 aerator thread
- Connection set (T-piece and flexible pressure hose) for a corner valve is included in the scope of delivery.
Areas of application:
- Washbasins (e.g. in guest toilets)
- Commercial washrooms
- Kitchenette
Technical features:
Â
|
Design:
|
pressure-resistant
|
|
Permissible operating pressure [ MPa (bar) ]:
|
1(10)
|
|
Water connections (screw connections):
|
G 3/8"
|
|
Hot water output at t = 25 K 1) [l/min]:
|
3.7
|
|
Max. water volume at switch-on / Max. flow rate 2) [l/min]:
|
2.4 / 3.7
|
|
Rated power [kW]:
|
6.5
|
|
Voltage [2~ / PE 400 V AC]:
|
Fixed connection
|
|
Rated current [A]:
|
16
|
|
Required cable cross-section [mm2]:
|
2.5
|
|
IES® bare-wire heating system
|
yes
|
|
Test mark VDE / protection class
|
yes / IP 25
|
|
Specific water resistance at 15°C [Ocm] = :
|
1100
|
|
Nominal capacity [liters]:
|
0.2
|
|
Weight when filled with water [kg]:
|
approx. 1.5
|
|
Dimensions (height × width × depth) [cm]:
|
13.5 × 18.6 × 8.7
|
1) Temperature increase from e.g. 15°C to 40°C           2) Flow rate limited for optimum temperature increase, can be adjusted by adjusting the water volume
ATTENTION: The offeredarticle may only be installed by the respective network operator or by a plumbing company registered in the network operator's plumber directory.
Instructions: https://www.clage.de/de/mediacenter
| Shipping weight: | 1,79 kg |
All reviews:
