Clage small instantaneous water heater MBH 3 3.5kW - 230V
The hydraulically controlled small instantaneous water heater, pressure-resistant design from Clage, offers you a perfect hot water supply for your hand wash basin with its effective bare-wire heating system. Thanks to its small size, it is perfectly suited to all wash basins. Since the water is heated immediately during the flow, the Clage small water heater is very energy efficient.
- Dimensions (width x height x depth): 13.5 x 18.6 x 8.7 cm
- Hydraulically controlled undersink electric water heater (undersink unit) for supplying a washbasin
- The heating switches on automatically as soon as water flows through the device
- New flow technology for an optimal water jet with economical water consumption
- Saves up to 85% energy compared to conventional small storage heaters
- Effective and maintenance-friendly IES® bare-wire heating system with replaceable heating cartridge
- New flow technology for an optimal water jet with economical water consumption
- Pressure-resistant design
- Removable panel for access to the central cover screw and water quantity adjustment
- Ready to plug in (3.5kW) or with power cable (from 4.4kW), length: = 65cm
- Special aerator with flow regulator for use in M22/M24 aerator thread
- Connection set (T-piece and flexible pressure hose) for an angle valve is included in the scope of delivery.
Fields of application:
- Individual supply: washbasin (e.g. in guest toilet)
- Commercial sanitary rooms
Technical properties:
Â
|
Design:
|
pressure-resistant
|
|
Permissible operating pressure [ MPa (bar) ]:
|
1(10)
|
|
Water connections (screw connections):
|
G 3/8"
|
|
Hot water output at t = 25 K 1) [l/min]:
|
2.0
|
|
Max. water volume at switch-on / Max. flow rate 2) [l/min]:
|
1.3 / 2.0
|
|
Rated power [kW]:
|
3.5
|
|
Voltage [1~ / N / PE 230 V AC]:
|
with plug
|
|
Rated current [A]:
|
15
|
|
Required cable cross-section [mm2]:
|
1.5
|
|
IES® bare-wire heating system
|
yes
|
|
Test mark VDE / protection class
|
yes / IP 25
|
|
Specific water resistance at 15°C [Ocm] = :
|
1100
|
|
Nominal capacity [liters]:
|
0.2
|
|
Weight when filled with water [kg]:
|
approx. 1.5
|
|
Dimensions (height × width × depth) [cm]:
|
13.5 × 18.6 × 8.7
|
1) Temperature increase from e.g. 15°C to 40°C           2) Flow rate limited for optimum temperature increase, can be adjusted by adjusting the water volume
ATTENTION: The offeredarticle may only be installed by the respective network operator or by a plumbing company registered in the network operator's plumber directory.
Instructions: https://www.clage.de/de/mediacenter
| Shipping weight: | 3,30 kg |
All reviews:
