Class II leak detector (EN 13160-1) with intrinsically safe probe circuit. Consisting of a control unit, leak indicating liquid tank (black LAG tank) and probe. Control unit with operating and alarm displays, visual/audible alarm, test button and increased interference protection. The audible alarm can be stopped with the acknowledge button. in the event of an alarm, additional external signaling devices (e.g. horns) or other additional devices such as the EMS event reporting system can be connected via the potential-free relay contact. Suitable for installation in control panels using a mounting frame; a sealing set (IP 54) is available for harsh operating conditions. The LAG tank is a control tank and an expansion tank at the same time. For above-ground containers, the ratio of usable capacity to the total amount of leak detection liquid may not exceed 1:35. For higher ratios, an additional container must be used.
Temperature range:
- Ambient: -5/+50 °C
- Storage: -10/+60 °C
Supply voltage:
- AC 230 V
Control unit:
- W x H x D: 100 x 188 x 65 mm
- Protection type: IP 30 (EN 60529)
Switching outputs:
- Relay outputs: 1 potential-free closer
- Contact load: AC 250 V, 2A
Container:
- Antistatic plastic, black
- W x H x D: 300 x 380 x 150 mm
- Usable capacity / total capacity: 4.5 l / 9 l
- Outlet: G¾"
- Protection type: IP 20 (EN 60529)
General building approval:
- Z-65.24-1
ATEX approval:
- TPS 03 ATEX 15639 6
- Ex II (1) G [Ex ia] IIC or [Ex ia] IIB
Figure: Afriso
| Shipping weight: | 1,82 kg |
There are no reviews yet.
