TP50M23/2 D EX submersible waste water pump without float

Non-floating waste water pump TP50M23/2 D EX _x000d_ Use: Pumping of domestic, municipal and industrial waste water and sewage, as well as slurries, including those with coarse and_x000d_ fibrous components._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of the pumping medium:_x000d_ 40°C, briefly up to 60°C._x000d_ _x000d_ Operating mode: continuous operation (S1)_x000d_ with a max. switching frequency_x000d_ of 15 starts/hour with submerged motor._x000d_ Design._x000d_ _x000d_ Type:_x000d_ Single-stage submersible pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ discharge connection 2 1/2 inch (65) BSPM._x000d_ Closed single-vane impeller with an_x000d_ free passage of 50.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil barrier chamber,_x000d_ Oil-filled sealing chamber with control option through inspection screw. Shaft bearing: Robust, maintenance-free, permanently lubricated roller bearing _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with 2-pole winding._x000d_ Insulation class of the winding H,_x000d_ protection type IP68. Temperature sensors in the_x000d_ Winding for temperature monitoring (W version only)._x000d_ Monitoring using PTC optionally possible._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling in_x000d_ immersion operation._x000d_ _x000d_ Materials: Motor housing: gray cast iron EN-GJL-250 Pump housing: gray cast iron EN-GJL-250 Impeller: gray cast iron EN-GJL-250 Motor shaft: Stainless steel 1.4104_x000d_ Mechanical connecting parts: Stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal (motor side): NBR_x000d_ _x000d_ Paint/coating:_x000d_ Two-component paint on_x000d_ epoxy resin basis, RAL 9005._x000d_ _x000d_ Technical data:_x000d_ Conveying current Qmax: 67.00 m³/h Conveying height Hmax: 17.00 m Power P1: 2.30 kW Power P2: 1.80 kW Frequency: 50 Hz Voltage: 400 V Current type: 3.00 Ph Rated current: 3.80 A Starting type: Direct Pressure connection: 2 1/2 inch (65) AG Weight: 43.65 kg Speed: 2900.00 1/min Explosion-proof: yes Connection cable: H07RN8-F PLUS - 4G1.5 Length of connection cable: 10.00 m Pump connection: without Scope of delivery: Pump with floor support foot Cable Make: HOMA