TP50M13/4 DA submersible pump with float

Sewage pump with float TP50M13/4 DA _x000d_ Use: Pumping of domestic, municipal and industrial sewage and waste water, as well as slurries, also with coarse and_x000d_ fibrous components._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. Temperature of the pumping medium:_x000d_ 40°C, briefly up to 60°C._x000d_ _x000d_ Operating mode: continuous operation (S1)_x000d_ with a max. number of starts_x000d_ of 15 starts/hour with submerged_x000d_ Submerged motor._x000d_ _x000d_ Design:_x000d_ Single-stage submersible pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ pressure connection 2 1/2 inch (65) male thread._x000d_ Closed single-vane impeller with an_x000d_ free passage of 50.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Bidirectional_x000d_ combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil barrier chamber._x000d_ Oil-filled seal chamber with_x000d_ Can be checked through the inspection screw. Shaft bearing: Robust, maintenance-free, permanently lubricated roller bearing. Motor Water pressure-tight electric motor, with 2-pole winding. Insulation class of winding H, protection class IP68. Thermal sensors in the winding for temperature monitoring (W version only) Monitoring by means of PTC optionally possible._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling in_x000d_ immersion operation._x000d_ _x000d_ Materials:_x000d_ Motor housing: gray cast iron EN-GJL-250_x000d_ Pump housing: gray cast iron EN-GJL-250_x000d_ Impeller: gray cast iron EN-GJL-250_x000d_ Motor shaft: stainless steel 1.4104_x000d_ Mechanical connection parts: stainless steel_x000d_ O-rings: NBR_x000d_ mechanical seal (medium side): SiC / SiC_x000d_ shaft seal (motor side): NBR_x000d_ _x000d_ Paint/coating:_x000d_ Two-component paint on an_x000d_ epoxy resin base, RAL 9005._x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 49.00 m³/h_x000d_ Head Hmax: 9.00 m_x000d_ Power P1: 1.30 kW_x000d_ Power P2: 1.00 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 400 V_x000d_ Current type: 3.00 Ph_x000d_ Rated current: 2.60 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 2 1/2 inch (65) AG_x000d_ Weight: 46.25 kg_x000d_ Speed: 1450.00 1/min_x000d_ Explosion-proof: no_x000d_ _x000d_ Connection cable: H07RN8-F PLUS - 4G1.5_x000d_ Length of connection cable: 10.00 m_x000d_ Pump switch: with external float switch_x000d_ _x000d_ Scope of delivery:_x000d_ Pump with floor stand._x000d_ Connecting cable with plug._x000d_ _x000d_ Make: HOMA