TP48M15/2 W submersible waste water pump without float

Non-floating waste water pump TP48M15/2 W _x000d_ Use: Pumping of waste water and sewage as well as sludge. Due to the large free passage of 50 mm, they are particularly Passage of 50 mm, they are particularly_x000d_ suitable for use in media with_x000d_ coarse solids and fibrous content._x000d_ Ideal for the economical disposal_x000d_ in trade, industry and private_x000d_ areas._x000d_ _x000d_ DIN EN 12050-2: TÜV certified, type-tested and monitored. Max. temperature of the pumped medium: 40°C, briefly up to 60°C Operating mode: continuous operation (S1)_x000d_ with a max. number of starts_x000d_ of 15 starts/hour with submerged_x000d_ motor._x000d_ _x000d_ Design:_x000d_ Single-stage submersible pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ pressure connection 2 inch (50) male thread._x000d_ Open single-vane impeller with a_x000d_ free passage of 50.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Direction-independent_x000d_ combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil barrier chamber._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearing._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ oil-filled with 2-pole winding._x000d_ Insulation class of winding H,_x000d_ protection type IP68._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling in_x000d_ immersion operation._x000d_ _x000d_ Materials:_x000d_ Motor housing: gray cast iron EN-GJL-250_x000d_ Pump housing: gray cast iron EN-GJL-250_x000d_ Impeller: stainless steel 1.4308_x000d_ Motor shaft: stainless steel 1.4104_x000d_ Mechanical connecting parts: stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal ring (motor side): NBR_x000d_ _x000d_ _x000d_ Paint/coating:_x000d_ Two-component paint on an_x000d_ epoxy resin basis, RAL 9005._x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 35.00 m³/h_x000d_ Delivery head Hmax: 14.50 m_x000d_ Power P1: 1.50 kW_x000d_ Power P2: 1.10 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Rated current: 6.50 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 2 inch (50) AG_x000d_ Weight: 22.00 kg_x000d_ Speed: 2900.00 1/min_x000d_ _x000d_ Power cable: H07RN-F - 3G1.5_x000d_ Length of power cable: 10.00 m_x000d_ Pump connection: without_x000d_ _x000d_ Scope of delivery: Pump with floor stand. Connection cable with plug. Make: HOMA