TP30V13/2 D submersible waste water pump without float

Non-floating waste water pump TP30V13/2 D _x000D_ Use: Pumping of domestic, municipal and industrial waste water and sewage, as well as slurries, also with coarse,_x000d_ long-fibered and plait-forming_x000d_ components, as well as gaseous_x000d_ media._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ Type-tested and monitored._x000d_ _x000d_ Max. temperature of pumped medium:_x000d_ 40_x000D_C, briefly up to 60_x000D_C._x000d_ _x000d_ Operating mode: continuous operation (S1)_x000d_ with a max. switching frequency_x000d_ of 15 switchings / hour with submerged_x000d_ motor._x000d_ _x000d_ Design:_x000d_ Single-stage submersible motor pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ pressure connection 2 inch (50) male thread._x000d_ Vortex impeller with a_x000d_ free passage of 30.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Direction-independent_x000d_ combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ Radial seal in oil barrier chamber._x000d_ Oil-filled seal chamber with_x000d_ inspection option through_x000d_ inspection screw._x000d_ _x000d_ Shaft bearing:_x000d_ Pumping of domestic, municipal and_x000d_ industrial sewage and wastewater,_x000d_ as well as slurries, including those with coarse,_x000d_ long-fibered and stringy_x000d_ components, as well as gaseous_x000d_ Media._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with 2-pole winding._x000d_ Insulation class of winding H,_x000d_ Protection class IP68. Thermal sensors in the_x000d_ winding for temperature monitoring (W version only)._x000d_ Monitoring using PTC optionally possible._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling for_x000d_ Submersible operation._x000d_ _x000d_ Materials:_x000d_ Motor housing: gray cast iron EN-GJL-250_x000d_ Pump housing: gray cast iron EN-GJL-250_x000d_ Impeller: Cast iron EN-GJL-250_x000d_ Motor shaft: Stainless steel 1.4104_x000d_ Mechanical connecting parts: Stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal (motor side): NBR_x000d_ _x000d_ Paint/coating:_x000d_ Two-component paint on_x000d_ epoxy resin basis, RAL 9005._x000d_ _x000d_ Technical data: Conveying current Qmax: 31.00 m³/h Conveying height Hmax: 8.70 m Power P1: 1.20 kW Power P2: 0.90 kW Frequency: 50 Hz Voltage: 400 V Current type: 3.00 Ph Rated current: 2.10 A Starting type: Direct Pressure connection: 2 inch (50) AG Weight: 27.69 kg Speed: 2900.00 1/min Explosion-proof: no Connection cable: H07RN8-F PLUS - 4G1.5 Length of connecting cable: 10.00 m Pump connection: without Scope of delivery: Pump with floor stand. Cable Make: HOMA