Non-floating waste water pump
TP28M10/2 W
Use:
Pump for pumping clean or
dirty water.
Basement drainage, keeping
pits, shafts and rooms dry.
Disposal of dirty water in
basement rooms (e.g. swimming
pools, washbasins, etc.)
drainage, keeping pits, shafts and rooms dry.
Disposal of dirty water in basements (e.g. washbasins, showers, washing machine).
Lowering of surface water
Flood relief._x000d_
Water extraction from watercourses or_x000d_
reservoirs._x000d_
_x000d_
DIN EN 12050-2: TÃœV certified,_x000d_
design tested and monitored._x000d_
_x000d_
Max. temperature of pumped liquid:_x000d_
40°C, briefly up to 60°C._x000d_
_x000d_
Type of duty: continuous duty (S1)_x000d_
at liquid temperature 41 - 60°C:_x000d_
Intermittent operation (S3 30%)._x000d_
_x000d_
Design:_x000d_
Single-stage submersible pump for_x000d_
portable and stationary_x000d_
use._x000d_
_x000d_
Hydraulics:
Pump with horizontal pressure port 1 1/2 inch (40) female thread.
Open multi-vane wheel with a
free passage of 28.00 mm.
Shaft seal:
3-fold radial seal.
Shaft bearing:
Robust
Shaft seal:
3-fold radial seal.
Shaft bearing:
Robust, maintenance-free, permanently lubricated
roller bearing.
Motor
Waterproof electric motor,_x000d_
oil-filled with 2-pole winding._x000d_
Insulation class of winding H,_x000d_
protection class IP68._x000d_
_x000d_
Motor cooling:_x000d_
Motor with surface cooling in_x000d_
immersion operation._x000d_
_x000d_
Materials:_x000d_
Suction strainer: Aluminum casting AISi12_x000d_
Suction cover: Aluminum casting AISi12_x000d_
Impeller: gray cast iron EN-GJL-250_x000d_
motor housing: cast aluminum AISi12_x000d_
motor bearing housing: cast aluminum AISi12_x000d_
motor housing cover: cast aluminum AISi12_x000d_
Motor shaft: Stainless steel 1.4418_x000d_
Mechan. connecting parts: Stainless steel_x000d_
O-rings: NBR_x000d_
Shaft seals: NBR_x000d_
_x000d_
Paint/coating:_x000d_
Two-component paint on an epoxy resin basis, RAL 5012.
_x000d_
_x000d_
Technical data:_x000d_
Conveying current Qmax: 22.00 m³/h_x000d_
Head Hmax: 13.60 m_x000d_
Power P1: 1.00 kW_x000d_
Power P2: 0.70 kW_x000d_
Frequency: 50 Hz_x000d_
Voltage: 230 V_x000d_
Current type: 1.00 Ph_x000d_
Rated current: 4.70 A_x000d_
Starting type: Direct_x000d_
Pressure connection: 1 1/2 inch (40) IG_x000d_
Weight: 13.50 kg_x000d_
Speed: 2900.00 1/min_x000d_
_x000d_
Power cable: H07RN-F - 3G1 (WA 4G1.5)_x000d_
Length of power cable: 10.00 m_x000d_
Pump switching: without_x000d_
_x000d_
Scope of delivery:_x000d_
Switchgear with motor protection,_x000d_
ON-OFF switch,_x000d_
Connecting cable with plug_x000d_
_x000d_
Make: HOMA
Shipping weight: |
13,50 kg
|