TP28M10/2 DL submersible waste water pump without float

Non-floating waste water pump TP28M10/2 DL _x000D_ Use: Pumping of domestic, municipal and industrial waste water and sewage, as well as slurries, including those with coarse and_x000d_ fibrous components._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of the pumping medium:_x000d_ 40°C, briefly up to 60°C._x000d_ _x000d_ Operating mode: continuous operation (S1)_x000d_ with a max. switching frequency_x000d_ of 15 starts/hour with submerged_x000d_ motor._x000d_ _x000d_ Design:_x000d_ Single-stage submersible motor pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ discharge connection 1 1/2 inch (40) female thread._x000d_ Open single-vane impeller with an_x000d_ free passage of 28.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Combined bidirectional_x000d_ mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil chamber._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearing._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ oil-filled with 2-pole winding. Insulation class of winding H, protection class IP68. Motor cooling: Motor with surface cooling in submerged operation _x000d_ Materials:_x000d_ Motor housing: gray cast iron EN-GJL-250_x000d_ Pump housing: gray cast iron EN-GJL-250_x000d_ Impeller: gray cast iron EN-GJL-250_x000d_ Motor shaft: Stainless steel 1.4104_x000d_ Mechanical connecting parts: Stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal (motor side): NBR_x000d_ _x000d_ Paint/coating:_x000d_ Two-component paint on an_x000d_ epoxy resin basis, RAL 9005._x000d_ _x000d_ Technical data:_x000d_ Conveying current Qmax: 22.00 m³/h Conveying height Hmax: 13.60 m Power P1: 1.00 kW Power P2: 0.70 kW Frequency: 50 Hz Voltage: 400 V_x000d_ Current type: 3.00 Ph_x000d_ Rated current: 1.80 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 1 1/2 inch (40) IG_x000d_ Weight: 13.82 kg Speed: 2900.00 1/min Connection cable: H07RN-F - 3G1 (WA 4G1.5) Length of connection cable: 10.00 m Pump connection: without Scope of delivery: loose cable end Make: HOMA