Sewage lifting unit Unterflur Saniquick UFT100 - TP28M10/2 D

Sewage lifting unit underfloor_x000d_ Saniquick UFT100 - TP28M10/2 D_x000d_ _x000d_ Use:_x000d_ Pumping clean or dirty_x000d_ Water, including water containing solids. For_x000d_ automatic wastewater disposal_x000d_ below the sewer backflow level. For_x000d_ connecting washbasins and_x000d_ washing machines in basements and_x000d_ cellars._x000d_ _x000d_ Collection shaft:_x000d_ Plastic shaft with anti-lift device,_x000d_ container volume 120.00 l, usable volume 66 l,_x000d_ with 3 DN 100 inlet nozzles. Nozzle_x000d_ DN 70 for ventilation and_x000d_ cable entry. Height-adjustable_x000d_ frame for adapting the_x000d_ cover plate to the floor level._x000d_ Cover plate with floor drain and_x000d_ Odour trap, can be used on both sides as a drain grate or tile frame. Frame and plate can be rotated for alignment with the tiled surface. Screw connection and pressure pipe to the pumps in the container, including non-return valve. Shaft extension up to max. 500 mm above standard KG pipe (DN400) possible. Can be used in groundwater-prone areas, the water level can be up to 3 m above Water level can be up to 3 meters above the top edge of the tank. Control: Electronic switchgear for controlling and monitoring all important operating functions Pneumatic level control with_x000d_ dynamic pressure control. Pump change_x000d_ after each switching cycle. Connection_x000d_ of the second pump at peak load. In the event of_x000d_ failure of a pump, automatic_x000d_ Switchover to the reserve pump._x000d_ Overload protection with motor protection relay._x000d_ Optical fault display. Alarm signal through_x000d_ built-in buzzer. Potential-free_x000d_ collective fault message. Configuration via_x000d_ free HOMApp possible. Communication_x000d_ between HOMApp and control via_x000d_ Bluetooth._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type tested and monitored._x000d_ _x000d_ Max. temperature of the pumped medium:_x000d_ 40°C, briefly up to 60°C. Design: Ready-to-connect installation unit with dirty water collection shaft as a double lifting unit with two pumps and control system_x000d_ _x000d_ Pump design:_x000d_ Two single-stage_x000d_ submersible drainage pumps._x000d_ Pressure connection 1 1/4 inch (32)._x000d_ Open single-vane impeller with a_x000d_ free passage of 10.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Direction-independent_x000d_ combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil barrier chamber._x000d_ _x000d_ Shaft/bearing: Strongly dimensioned_x000d_ chromium steel motor shaft,_x000d_ permanently lubricated roller bearings._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with 2-pole winding._x000d_ Insulation class of winding H,_x000d_ Protection class IP68._x000d_ _x000d_ Motor cooling: jacket cooling of the motor_x000d_ by means of the pumped medium._x000d_ _x000d_ Materials:_x000d_ Collection tank: PE_x000d_ Insertion set: Plastic PP-GF_x000d_ Motor housing: Gray cast iron EN-GJL-250_x000d_ Pump housing: Gray cast iron EN-GJL-250_x000d_ Impeller: Gray cast iron EN-GJL-250_x000d_ Motor shaft: Stainless steel 1.4104_x000d_ Mechanical connecting parts: Stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 22.00 m³/h_x000d_ Head Hmax: 13.60 m_x000d_ Number of pumps: 2.00_x000d_ Power P1: 1.00 kW_x000d_ Power P2: 0.70 kW_x000d_ Frequency: 50 Hz_x000d_ voltage: 400 V_x000d_ current type: 3.00 Ph_x000d_ nominal current: 1.80 A_x000d_ speed: 2900.00 1/min_x000d_ Start type: Direct Tank volume: 120.00 L Pressure connection: 1 1/4 inch (32) Weight: 51.03 kg Explosion-proof: no Dimensions Dimensions: Width: 590.00 mm Depth: 585.00 mm Height: 991.00 mm Connection cable: H07RN-F - 3G1 (WA 4G1.5)_x000d_ length of connection cable: 10.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Collection shaft with cover, 2 pumps_x000d_ with non-return valves and pipework,_x000d_ 10 m connection cable, PCM control unit with_x000d_ pneumatic level control and_x000d_ alarm message._x000d_ _x000d_ Make: HOMA