Sanistar Plus 335 D sewage lifting unit - PCM

Sewage lifting unit_x000d_ Sanistar Plus 335 D - PCM_x000d_ _x000d_ Use:_x000d_ Pumping of sewage and faeces, also_x000d_ with coarse and fibrous components._x000d_ For draining rooms below the backflow level in which wastewater accumulates, e.g. in residential complexes, office buildings or catering establishments according to DIN EN 12056 Collection tank: Non-rotting, gas- and odor-tight plastic tank. Inlets: 1 x DN 150 horizontal 300 mm inlet height, 1 x DN 150 vertical 400 mm Inlet height with 90 degree fitting_x000d_ (on-site) as horizontal inlet_x000d_ 600 mm or higher, horizontally pivotable,_x000d_ 1 x DN 100 vertical, 700 mm inlet height,_x000d_ 2 x DN 150 connecting nozzles for_x000d_ tandem installation of containers._x000d_ Pressure connection: flange DN 80._x000d_ Flexible adapter DN 80/DN 100._x000d_ Soft-sealing ball check valve integrated in the pressure connection_x000d_ soft-sealing ball non-return valve integrated in the pressure connection._x000d_ Vent connection: DN 70 vertical._x000d_ Connection for R1" female hand membrane pump._x000d_ Cleaning opening with screw cap._x000d_ _x000d_ Control: Electronic control unit (PCM) for controlling and monitoring all important operating functions. Pneumatic level control with dynamic pressure switch. Motor protection through Current and temperature monitoring of the_x000d_ winding. Optical operating and_x000d_ fault display. Alarm signal through_x000d_ built-in buzzer, even independently of the mains supply_x000d_ through built-in rechargeable battery (included in the scope of delivery_x000d_). Potential-free_x000d_ Collective fault message._x000d_ Direction of rotation monitoring for three-phase current,_x000d_ power plug. Diagnosis and_x000d_ operating states can be parameterized and_x000d_ queried via smartphone_x000d_ (Bluetooth) using the free_x000d_ HOMApp smartphone app._x000d_ queried._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of pumping medium:_x000d_ 40°C, briefly up to 60°C. Design: Flood-proof single lifting unit with control unit, collection tank and pump, ready for connection _x000d_ Design: Pump:_x000d_ Pump chamber integrated in the collection tank, vertical pressure connection DN 80. Vortex impeller with a free passage of 45.00 mm._x000d_ _x000d_ Operating mode: Intermittent._x000d_ _x000d_ Shaft seal:_x000d_ 3-fold radial seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearings._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with 2-pole winding._x000d_ Insulation class H, protection class IP68. Materials: Pressure cap: gray cast iron EN-GJL-250 Impeller: gray cast iron EN-GJL-250 Motor housing: gray cast iron EN-GJL-250_x000d_ Collection tank: polyethylene_x000d_ Motor shaft: stainless steel 1.4104_x000d_ Mechanical connecting parts: stainless steel_x000d_ O-rings: NBR_x000d_ Shaft seals: NBR_x000d_ Upper bearing: grooved ball bearing_x000d_ Lower bearing: grooved ball bearing_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 37.40 m³/h_x000d_ Delivery height Hmax: 18.00 m_x000d_ number of pumps: 2.00_x000d_ power P1: 4.00 kW_x000d_ power P2: 3.30 kW_x000d_ frequency: 50 Hz_x000d_ Voltage: 400 V_x000d_ Current type: 3.00 Ph_x000d_ Rated current: 6.60 A_x000d_ Speed: 2900.00 1/min_x000d_ Starting type: Direct_x000d_ Tank volume: 300.00 L_x000d_ Pressure connection: DN 80_x000d_ Weight: 144.24 kg_x000d_ Explosion-proof: no_x000d_ Cutting mechanism: no_x000d_ _x000d_ Dimensions: Width: 850.00 mm Depth: 850.00 mm Height: 800.00 mm Connection cable: H07RN8-F PLUS - 6G1.5_x000d_ length of connection cable: 4.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Tank with 2 pumps, soft-sealing_x000d_ Non-return ball valve,_x000d_ pressure connection with flange DN 80 and_x000d_ DN 80/DN 100 flexible adapter_x000d_ with clamps. Flexible_x000d_ connectors for inlet DN 100 and_x000d_ Ventilation DN 70 with clamps._x000d_ Pneumatic level switch._x000d_ Electronic control unit_x000d_ connection cable with plug._x000d_ _x000d_ Make: HOMA