San.iQ cut V small sewage lifting unit

Small sewage lifting unit_x000d_ San.iQ cut V_x000d_ _x000d_ Use:_x000d_ Small lifting unit for_x000d_ front wall installation._x000d_ Disposes of wastewater and sewage_x000d_ Water from showers, washbasins,_x000d_ urinals, bidets and WCs in rooms below_x000d_ the backflow level of the sewer_x000d_ (basement or cellar rooms), or_x000d_ without a sufficient gradient to the_x000d_ next wastewater collection pipe._x000d_ For the disposal of up to three_x000d_ sanitary units in accordance with DIN EN 12050-3_x000d_ Hardened stainless steel macerator_x000d_ Barracuda for macerating faeces_x000d_ and toilet paper._x000d_ Water-level dependent, pneumatic_x000d_ level control with control electronics,_x000d_ flooding monitor, alarm message_x000d_ and runtime monitor._x000d_ _x000d_ Collection tank:_x000d_ Non-rotting, gas- and odor-tight_x000d_ plastic container. Horizontal toilet inlet DN 100_x000d_, inlet height 180 mm_x000d_ (DIN 1387 Form A / DIN1388 Form A)._x000d_ Two lateral inlets DN 40 with_x000d_ integrated non-return valve._x000d_ Pressure connection Ø 25 (Ø 34) mm with_x000d_ built-in ball check valve._x000d_ Air-admittance opening with_x000d_ activated carbon filter._x000d_ _x000d_ Control: Water level dependent, pneumatic_x000d_ level control with control_x000d_ electronics. Flooding monitoring,_x000d_ alarm signal, runtime monitoring._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of pumped liquid:_x000d_ 35_x000d_C, briefly up to 60_x000d_C._x000d_ _x000d_ Design:_x000d_ Small lifting unit ready for connection._x000d_ _x000d_ Pump design:_x000d_ Single-stage submersible motor pump with_x000d_ horizontal pressure connection._x000d_ Open multi-vane wheel_x000d_ with upstream cutter_x000d_ for macerating solids with a_x000d_ free passage of 25.00 mm._x000d_ _x000d_ Mode of operation: Intermittent._x000d_ _x000d_ Shaft seal:_x000d_ 3-fold radial seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearings._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ with 2-pole winding._x000d_ Insulation class of the winding B,_x000d_ protection class IP44. Thermofühler in der_x000d_ Thermofühler zur Temperaturüberwachung_x000d_ in der Wicklung._x000d_ _x000d_ Werkstoffe:_x000d_ Collection container: plastic ABS_x000d_ Pump housing: plastic PP-GF_x000d_ Impeller: plastic PP-GF_x000d_ Macerator: stainless steel 1.4122_x000d_ Motor housing: stainless steel 1.4301_x000d_ Motor shaft: Stainless steel 1.4021_x000d_ Mechanical connecting parts: Stainless steel_x000d_ Elastomers: NBR_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 6.50 m³/h_x000d_ Delivery head Hmax: 6.50 m_x000d_ Number of pumps: 1.00_x000d_ Power P1: 0.65 kW_x000d_ Power P2: 0.35 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Nominal current: 2.80 A_x000d_ Speed: 2850.00 1/min_x000d_ Starting type: Direct_x000d_ Tank volume: 11.00 L_x000d_ Pressure connection: DN 32_x000d_ Weight: 7.00 kg_x000d_ Explosion-proof: no_x000d_ Cutting mechanism: yes_x000d_ _x000d_ Dimensions:_x000d_ Width: 170.00 mm Depth: 590.00 mm Height: 270.00 mm Connection cable: H03VV-F - 3G0.75 Length of connection cable: 1.40 m_x000d_ _x000d_ Scope of delivery:_x000d_ Tank with pump, flexible_x000d_ connection piece and connection clamp,_x000d_ connection cable with plug._x000d_ _x000d_ Make: HOMA