Motor-flooded construction pump with float HBP555 DA

Motor-driven construction pump with float_x000d_ HBP555 DA_x000d_ _x000d_ Use:_x000d_ Pumping clean or dirty_x000d_ water, including water containing abrasive_x000d_ Sand or mud._x000d_ Applications include cellar drainage,_x000d_ groundwater lowering, keeping_x000d_ construction sites or shafts dry,_x000d_ process water supply, use on_x000d_ Ships, emergency use in case of flooding etc. The flooding of the motor ensures adequate cooling even at extremely low water levels. Optimized for professional use on construction sites _x000d_ Max. temperature of the pumping medium:_x000d_ 40°C._x000d_ _x000d_ Operating mode: continuous operation (S1)_x000d_ _x000d_ Design:_x000d_ Submersible motor pump with motor_x000d_ for portable and stationary_x000d_ use, consisting of:_x000d_ _x000d_ Hydraulics:_x000d_ Single-stage centrifugal pump_x000d_ with cooling jacket and vertical_x000d_ Pressure connection 3 inch (80) male._x000d_ Open multi-vane wheel with a_x000d_ free passage of 9.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Shaft seal ring in combination_x000d_ with a double-acting mechanical seal in an oil bath Motor:_x000d_ Waterproof electric motor_x000d_ with 2-pole winding._x000d_ Insulation class of the winding F,_x000d_ protection class IP68._x000d_ From the motor_x000d_ separate cable connection compartment._x000d_ Thermocouple in the_x000d_ winding for temperature monitoring._x000d_ _x000d_ Motor cooling:_x000d_ Jacket cooling of the motor by_x000d_ conveyed medium._x000d_ _x000d_ Materials:_x000d_ Motor housing: Stainless steel_x000d_ Upper motor bearing housing: Aluminum_x000d_ Lower motor bearing housing: Gray cast iron GJL_x000d_ Pressure cover / diffuser: Gray cast iron GJL_x000d_ Pump housing: cast iron GGG 40 (GJS-400-15)_x000d_ Impeller: cast iron GJS_x000d_ Suction strainer: stainless steel_x000d_ Motor shaft: stainless steel_x000d_ Outer jacket: stainless steel_x000d_ Screws: stainless steel_x000d_ O-rings: NBR_x000d_ mechanical seal: SiC, ceramic_x000d_ shaft seal ring: NBR_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 70.00 m³/h Head Hmax: 31.00 m Power P1: 6.70 kW Power P2: 5.50 kW Frequency: 50 Hz Voltage: 400 V Current type: 3.00 Ph Rated current: 11.40 A Starting type: Direct Pressure connection: 3 inch (80) AG Weight: 71.00 kg Speed: 2850.00 1/min Pump connection: with external float Connection cable: H07RN8-F4G Length of connecting cable: 20.00 m_x000d_ Pump circuit: with external float_x000d_ _x000d_ Scope of delivery:_x000d_ Pump with 20.00 m connecting cable and_x000d_ STORZ coupling._x000d_ Switchgear with motor protection, HAND switch and mains plug. _x000d_ Make: HOMA