Hot water submersible pump without float H328V W

Hot water submersible pump without float_x000d_ H328V W_x000d_ _x000d_ Pumps for pumping clean_x000d_ or dirty water at_x000d_ high temperatures. The design_x000d_ of all housing parts from thick-walled_x000d_ gray cast iron and all seals from_x000d_ Viton allows use for drainage_x000d_ tasks in media up to max. 90 C,_x000d_ also for water vapor condensate._x000d_ Areas of application include laundries,_x000d_ washing plants, the_x000d_ food industry and other_x000d_ industrial or commercial areas._x000d_ _x000d_ Use:_x000d_ Pumping clean or dirty_x000d_ Water at high temperatures, also_x000d_ for water vapor condensate._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of the pumping medium:_x000d_ 90 C_x000d_ _x000d_ Operating mode: Intermittent operation._x000d_ _x000d_ Design:_x000d_ Single-stage submersible motor pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ discharge connection 1 1/2 inch (40) female thread._x000d_ Vortex impeller with a_x000d_ free passage of 28.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Direction-independent_x000d_ combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearing._x000d_ _x000d_ Motor:_x000d_ Oil-filled, water pressure-tight electric motor with_x000d_ 2-pole winding._x000d_ Insulation class of winding H,_x000d_ protection type IP68._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling in_x000d_ immersion operation._x000d_ _x000d_ Materials:_x000d_ Suction strainer: gray cast iron EN-GJL-250_x000d_ Suction cover: gray cast iron EN-GJL-250_x000d_ Impeller: gray cast iron EN-GJL-250_x000d_ motor housing: gray cast iron EN-GJL-250_x000d_ motor bearing housing: gray cast iron EN-GJL-250_x000d_ motor housing cover: gray cast iron EN-GJL-250_x000d_ Motor shaft: Stainless steel 1.4418_x000d_ Screws: Stainless steel_x000d_ O-rings: Viton_x000d_ Connection cable: Silicon_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal ring (motor side): Viton_x000d_ _x000d_ Coating:_x000d_ Two-component epoxy resin-based paint, RAL 9005._x000d_ _x000d_ Technical data: Conveying current Qmax: 23.70 m³/h Conveying height Hmax: 10.00 m Power P1: 1.20 kW Power P2: 0.90 kW Frequency: 50 Hz voltage: 230 V current: 1.00 Ph nominal current: 5.20 A Starting type: Direct Pressure connection: 1 1/2 inch (40) IG Weight: 20.94 kg Speed: 2900.00 1/min _x000d_ connection cable: H07RN-F - 3G1 (WA 4G1.5)_x000d_ length of connection cable: 10.00 m_x000d_ pump connection: without_x000d_ _x000d_ scope of delivery:_x000d_ Switchgear with motor protection, ON/OFF switch, Connection cable with plug Make: HOMA