Description
- For the automatic flushing of urinals
- For Geberit mounting elements for urinals with front actuation
- For installation in Geberit urinal control sets for installation in new buildings (2009 and later)
- Cover plate with safety latch
- Reliable IR distance detection
- IR sensor self-adjusting
- Water-saving hybrid mode can be set
- Flushing time manually adjustable
- Dynamic flushing time adjustment
- Adjustable pre-flush
- Can be switched to operate with a lid urinal
- Power supply through mains connection
- Power supply with LED display
- Valve closes in case of power failure
- Functions can be set and queried using the Geberit Service-Handy
- The Geberit Clean-Handy can be used to deactivate the toilet-cleaning solution
- Flushing volume can be reduced to 0.5 liters per flush using the throttle screw of the roughing-in set
- Sound insulation group II according to DIN 4109
- Degree of protection IP45
- Rated voltage 110–240 V AC
- Power frequency 50–60 Hz
- Operating voltage 4.5 V DC
- Power consumption < 0.5W
- Flow pressure 100–800 kpa
- Minimum flow pressure 100 kpa
- Maximum test pressure water 1600 kpa
- Maximum test pressure air/inert gas 300 kpa
- Maximum water temperature 30°C
- Flow rate at 100 kpa without flow restrictor 0.3 l/s
- Flow rate at 100 kpa with flow limiter 0.18 l/s
- Calculated flow 0.22 l/s
- Interval flushing setting range 1–168 h
- Interval flushing factory setting 24 h
- Interval flushing time Setting range 3–180 s
- Interval flushing time factory setting 5 s
- Dwell time Setting range 3–15 s
- Dwell time factory setting 7 s
- Flushing time setting range 1–15 s
- Flushing time factory setting 7 s
- Cover plate type 10, with IR window
- Infrared control unit, pre-assembled on mounting frame
- Solenoid valve
- Power supply
- Mounting material
| Shipping weight: | 1,00 kg |
Reviews
There are no reviews yet.
Notify me when this item is available
