Flat suction pump without sensor circuit_x000d_
C240 W Flat_x000d_
_x000d_
Use:_x000d_
Pump for pumping clean_x000d_
or slightly dirty water._x000d_
For flat suction down to a residual water level of approx. 2 mm.
Cellar drainage,
drainage of pits, shafts,
rooms. Disposal of waste water in
cellar rooms (e.g. washbasin, shower,
Washing machine). Emptying of_x000d_
collection basins. Emergency pump in case of flooding._x000d_
The cooling jacket with_x000d_
pressure connection at the top ensures_x000d_
adequate motor cooling at_x000d_
low water level (snore operation)_x000d_
guaranteed._x000d_
_x000d_
Max. temperature of the pumping medium:_x000d_
35_x000D_C, briefly up to 60_x000D_C._x000d_
_x000d_
Operating mode: Continuous operation (no), at
medium temperature 35°C - 60°C:
intermittent operation (S3 30%).
Design:
Motor-flooded submersible motor pump for
portable and stationary_x000d_
use, consisting of:_x000d_
_x000d_
Pump: single-stage centrifugal pump with_x000d_
vertical pressure connection 1 1/4 inch (32) female thread._x000d_
_x000d_
Impeller: Open multi-vane impeller with_x000d_
a free passage of 3.00 mm._x000d_
_x000d_
Motor: Pressurized water-tight,_x000d_
medium-flooded motor with 2-pole_x000d_
Winding B, protection class IP68._x000d_
Thermocouple for temperature monitoring_x000d_
in the winding._x000d_
_x000d_
Shaft/bearing: Strongly dimensioned_x000d_
chrome steel motor shaft,_x000d_
sealed roller bearings._x000d_
_x000d_
Shaft seal:_x000d_
3-fold radial seal._x000d_
_x000d_
Motor cooling: jacket cooling of the motor_x000d_
by the pumped liquid._x000d_
_x000d_
Materials:_x000d_
Outer housing: Polypropylene (PP)_x000d_
Impeller: Polypropylene (PP)_x000d_
Motor housing: Stainless steel_x000d_
Motor shaft: Stainless steel_x000d_
Mechanical connecting parts: stainless steel_x000d_
elastomers: NBR_x000d_
shaft seals: NBR_x000d_
_x000d_
Technical data:_x000d_
flow rate Qmax: 8.00 m³/h_x000d_
Delivery head Hmax: 7.00 m_x000d_
Power P1: 0.50 kW_x000d_
Power P2: 0.25 kW_x000d_
Frequency: 50 Hz Hz_x000d_
Voltage: 230 V_x000d_
Current type: 1.00 Ph_x000d_
Rated current: 2.20 A_x000d_
Starting type: Direct_x000d_
Pressure connection: 1 1/4 inch (32) AG_x000d_
Weight: 5.00 kg_x000d_
Speed: 2850.00 1/min_x000d_
_x000d_
Power cable: H07RN8-F - 3G1_x000d_
Length of power cable: 10.00 m_x000d_
_x000d_
Scope of delivery:_x000d_
Pump with 1 1/4 inch double socket (32) incl._x000d_
Sealing rings and hose connection._x000d_
Connecting cable with plug._x000d_
_x000d_
Make: HOMA