Clage M-3 small instantaneous water heater with 3.5kW/230V

  • SKU: 1500-17003
  • GTIN: 4010436170037
  • Manufacturers:
type 
121,67 €
incl. 19% VAT , plus shipping costs (Paketdienst (DHL))
  • Only 6 left
  • Delivery time: 2 - 5 Workdays (DE - int. shipments may differ)
Description

Clage small instantaneous water heater M 3 3.5kW / 230V pressureless

The hydraulically controlled small instantaneous water heater from Clage offers you a perfect hot water supply for your washbasin with its effective bare-wire heating system. Thanks to its small size, it is perfectly suited to all washbasins. Since the water is heated immediately during the flow, the Clage small instantaneous water heater is very energy efficient. It is perfectly suited as an energy-saving replacement for standard small storage heaters that were combined with low-pressure taps.

  • Hydraulically controlled undersink electric water heater for supplying a washbasin with hot water
  • The heating switches on automatically as soon as water flows through the device
  • New flow technology for an optimal water jet with economical water consumption
  • Saves up to 85% energy compared to conventional small storage heaters
  • Effective and maintenance-friendly IES® bare-wire heating system with replaceable heating cartridge
  • Non-pressurized design, requires a special tap for non-pressurized hot water appliances
  • Removable panel for access to the central cover screw and water volume adjustment
  • Ready to plug in (3.5kW)
  • Special aerator with flow rate controller for use in M22/M24 aerator thread

 

Applications:

  • Individual supply: washbasin (e.g. in guest toilet)
  • Commercial sanitary rooms

Technical properties:

Design:
non-pressurized
Water connections (screw connections):
G 3/8"
Hot water output at?t = 25 K 1) [l/min]:
2.0
Max. flow rate 2) [l/min]:
1.3 / 2.0
Rated power [kW]:
3.5
Voltage [1~ / N / PE 230 V AC]:
with plug
Rated current [A]:
15
Required cable cross-section [mm 2 ]:
1.5
IES ® bare-wire heating system:
yes
VDE certification mark / protection type:
yes / IP 25
Specific water resistance at 15 °C [Ocm] = :
1100
Nominal capacity [liters]:
0.2
Weight when full [kg]:
approx. 1.5
Dimensions (height × width × depth) [cm]:
13.5 x 18.6 x 8.7

1) Temperature increase from e.g. 15°C to 40°C. 2) Flow rate limited for optimal temperature increase, can be adjusted by adjusting the water volume

 

Instructions: https://www.clage.de/de/mediacenter

Shipping weight: 1,56 kg
Write the first review for this item and help others make a purchase decision!

There are no reviews yet.

Contact data