Carrying box with pump and hose
Construction box R - HBPR504 WA
_x000d_
_x000d_
Use:
Pumping clean or dirty
water, including water with abrasive
Sand or mud._x000d_
Drainage applications on construction sites._x000d_
The plastic box can be connected to the_x000d_
basic equipment of the_x000d_
construction vehicle._x000d_
The flooding of the motor ensures_x000d_
adequate cooling even at extremely_x000d_
low water levels. Optimized for_x000d_
professional use on construction sites._x000d_
_x000d_
The Construction Box R - HBPR504 WA consists of:_x000d_
_x000d_
- Submersible waste water pump_x000d_
type HBPR504 WA with automatic_x000d_
float switch_x000d_
- 10 m fabric hose with_x000d_
C-coupling_x000d_
- carrying basket for transport, storage_x000d_
and as mud protection when_x000d_
the pump is in operation_x000d_
_x000d_
Pump is equipped with a stainless steel agitator head_x000d_
to enable a strong pumping effect_x000d_
in muddy and slimy_x000d_
Media._x000d_
_x000d_
DIN EN 12050-2: TÃœV certified,_x000d_
type-tested and monitored._x000d_
_x000d_
Max. temperature of the pumping medium:_x000d_
40 C._x000d_
_x000d_
Operating mode: continuous operation (S1)_x000d_
_x000d_
Design:_x000d_
Single-stage submersible motor pump for_x000d_
portable and stationary_x000d_
use, consisting of:_x000d_
_x000d_
Hydraulics:_x000d_
Single-stage centrifugal pump with_x000d_
bottom discharge connection 1 1/2 inch (40) male thread._x000d_
Open multi-vane wheel with an_x000d_
free passage of 6.00 mm._x000d_
_x000d_
Shaft seal:_x000d_
Oil seal in combination_x000d_
with double-acting mechanical seal_x000d_
in oil bath._x000d_
_x000d_
Shaft bearing:_x000d_
Heavily dimensioned chrome steel motor shaft,_x000d_
permanently lubricated roller bearings_x000d_
_x000d_
Motor:_x000d_
Water pressure-tight electric motor_x000d_
with 2-pole winding._x000d_
Insulation class F,_x000d_
protection class IP68._x000d_
Cable connection compartment separate from motor._x000d_
Thermal sensors in the_x000d_
winding for temperature monitoring._x000d_
_x000d_
Motor cooling:_x000d_
Jacket cooling of the motor by means of the_x000d_
pumped liquid._x000d_
_x000d_
Materials:_x000d_
Motor housing: Aluminum_x000d_
Upper motor bearing housing: Aluminum_x000d_
Pressure cover: gray cast iron GJL_x000d_
pump housing: gray cast iron GJL_x000d_
impeller: cast iron GJS_x000d_
suction strainer: PVC_x000d_
motor shaft: stainless steel_x000d_
screws: stainless steel_x000d_
O-rings: NBR_x000d_
Mechanical seal: SiC, ceramic_x000d_
Shaft seal ring: NBR_x000d_
Upper bearing: grooved ball bearing_x000d_
Lower bearing: grooved ball bearing_x000d_
_x000d_
Technical data:
Conveying current Qmax: 13.00 m³/h
Conveying height Hmax: 12.00 m
Power P1: 0.70 kW
Power P2: 0.40 kW
Frequency: 50 Hz
voltage: 230 V
current: 1.00 Ph
nominal current: 3.00 A
start type: direct
Pressure connection: 1 1/2 inch (40) male thread_x000d_
Weight: 19.12 kg_x000d_
Speed: 2850.00 1/min_x000d_
Pump switchover: with internal float switch_x000d_
_x000d_
Connection cable: H07RN8-F - 3G1_x000d_
length of connection cable: 10.00 m_x000d_
pump connection: with internal float_x000d_
_x000d_
Scope of delivery:_x000d_
Pump with STORZ C-coupling,_x000d_
connection cable with plug,_x000d_
automatic float switch
HOMA Nivomatik.
Carrying basket, 10 m C-hose.
_x000D_
Make: HOMA
Shipping weight: |
19,12 kg
|