Carrying box with pump and hose construction box - HBP503WA

Carrying box with pump and hose Construction box - HBP503WA _x000d_ Use: Pumping clean or dirty water, including water with abrasive Sand or mud._x000d_ Drainage applications on construction sites._x000d_ The plastic box can be connected to the_x000d_ basic equipment of the_x000d_ construction vehicle._x000d_ The flooding of the motor ensures_x000d_ adequate cooling even at extremely_x000d_ low water levels. Optimized for_x000d_ professional use on construction sites._x000d_ _x000d_ The Bau-Box - HBP503WA consists of:_x000d_ _x000d_ - Submersible drainage pump type HBP503 WA with automatic float switch - 10 m fabric hose with C-clutch - carrying basket for transport, storage and as sludge protection when_x000d_ the pump is in operation_x000d_ _x000d_ Pump with automatic float switch_x000d_ HOMA Nivomatik, HOMA switchgear WA1,_x000d_ motor protection, AUTO-manual switch_x000d_ and mains plug._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type tested and monitored._x000d_ _x000d_ Max. temperature of the pumped medium:_x000d_ 40 degrees C,_x000d_ _x000d_ Operating mode: continuous operation (no)_x000d_ _x000d_ Design:_x000d_ Single-stage stainless steel centrifugal pump with_x000d_ cooling jacket_x000d_ _x000d_ Hydraulics:_x000d_ Pump with top, vertical_x000d_ pressure connection 2 inch (50) male thread._x000d_ Open multi-vane wheel with a_x000d_ free passage of 6.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Shaft seal ring in combination_x000d_ with double-acting mechanical seal_x000d_ ceramic/carbon/SIC in oil bath._x000d_ _x000d_ Shaft bearing:_x000d_ Strongly dimensioned chrome steel motor shaft,_x000d_ permanently lubricated roller bearings_x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor_x000d_ with 2-pole winding._x000d_ Insulation class of the winding F,_x000d_ protection type IP68._x000d_ Cable connection compartment separated from motor._x000d_ _x000d_ Motor cooling:_x000d_ Jacket cooling of motor by_x000d_ pumped medium._x000d_ _x000d_ Materials:_x000d_ Bearing housing: Polypropylene_x000d_ Motor housing: Stainless steel_x000d_ Upper motor bearing housing: Aluminum_x000d_ Lower motor bearing housing: Gray cast iron GJL_x000d_ Pressure cover / diffuser: Gray cast iron GJL_x000d_ Pump housing: gray cast iron GJL_x000d_ impeller: cast iron GJS_x000d_ suction strainer: stainless steel_x000d_ motor shaft: stainless steel_x000d_ outer jacket: stainless steel_x000d_ screws: stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal: SiC, ceramic_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 15.50 m³/h_x000d_ Head Hmax: 12.00 m_x000d_ Power P1: 0.67 kW_x000d_ Power P2: 0.40 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Rated current: 3.00 A_x000d_ Starting method: Direct_x000d_ Pressure connection: 2 inch (50) male thread_x000d_ Weight: 21.00 kg_x000d_ Speed: 2850.00 1/min_x000d_ _x000d_ connection cable: H07RN8-F4G1_x000d_ length of connection cable: 10.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Pump with STORZ C-coupling,_x000d_ Connection cable with plug, automatic float switch HOMA Nivomatik. Carrying basket, 10 m C-hose. _x000d_ Make: HOMA