CH413 D submersible waste water pump

Submersible waste water pump_x000d_ CH413 D_x000d_ _x000d_ Use:_x000d_ Pumping of chemically contaminated commercial and_x000d_ industrial clear_x000d_ or dirty water (pH 5-14), also with solids content. _x000D_ DIN EN 12050-2: TÜV certified, type tested and monitored. _x000D_ Max. temperature of the pumping medium: 40°C, briefly up to 60°C. Operating mode: continuous operation (S1) Design: single-stage submersible motor pump for portable and stationary use Design:_x000d_ Single-stage submersible motor pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Single-stage centrifugal pump_x000d_ with horizontal pressure port 1 1/2 inch (40) female thread._x000d_ Open multi-vane wheel with an_x000d_ free passage of 10.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ Combination of mechanical seal_x000d_ Combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil barrier chamber._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ Roller bearing._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ oil-filled with 2-pole winding._x000d_ Insulation class of winding H,_x000d_ protection type IP68._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling in_x000d_ immersion operation._x000d_ _x000d_ Materials:_x000d_ Suction strainer: gray cast iron EN-GJL-250_x000d_ Suction cover: gray cast iron EN-GJL-250_x000d_ Impeller: gray cast iron EN-GJL-250_x000d_ Motor housing: gray cast iron EN-GJL-250_x000d_ Motor bearing housing: gray cast iron EN-GJL-250_x000d_ Motor casing cover: gray cast iron EN-GJL-250_x000d_ Motor shaft: stainless steel 1.4104_x000d_ Screws: stainless steel_x000d_ O-rings: Viton_x000d_ Cable protection hose: polyolefin_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal (motor side): Viton_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 23.50 m³/h_x000d_ Delivery head Hmax: 12.00 m_x000d_ Power P1: 1.20 kW_x000d_ Power P2: 0.82 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 400 V_x000d_ Current type: 3.00 Ph_x000d_ Rated current: 2.20 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 1 1/2 inch (40) AG_x000d_ Weight: 16.52 kg_x000d_ Speed: 2900.00 1/min_x000d_ _x000d_ Power cable: H07RN8-F PLUS - 4G1.5_x000d_ Length of power cable: 10.00 m_x000d_ Pump connection: without_x000d_ x000d_ Scope of delivery:_x000d_ without connection cable with 5 m_x000d_ cable protection conduit._x000d_ Version L without switching device. Optional_x000d_ switching device, see CH413 accessories._x000d_ Connecting cable with plug._x000d_ _x000d_ Make: HOMA