C250 W non-floating waste water pump

Floater-less drainage pump C250 W _x000d_ Use: Pump for pumping clean or dirty water. Basement drainage, keeping pits, shafts, rooms dry. Sewage disposal in basement rooms (e.g. washbasins, showers Pits, shafts, rooms._x000d_ Sewage disposal_x000d_ in basements (e.g. washbasins,_x000d_ showers, washing machine)._x000d_ Lowering of surface water._x000d_ Emergency flood relief._x000d_ Water extraction from watercourses or_x000d_ reservoirs for non-pressurized irrigation._x000d_ The cooling jacket with top_x000d_ pressure connection ensures adequate_x000d_ motor cooling even at low_x000d_ Water level (snore operation)_x000d_ guaranteed. Automatic ventilation_x000d_ with additional ventilation screw._x000d_ Removable suction sieve makes it possible to_x000d_ extract residual water up to 5 mm._x000d_ Automatic flushing device possible._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of pumped liquid:_x000d_ 35°C, briefly up to 60°C. Operating mode: continuous operation (S1) at a medium temperature of 36–60°C: intermittent operation (S3 30%). Design Design:_x000d_ Motor-driven submersible pump for_x000d_ portable and stationary_x000d_ use, consisting of:_x000d_ _x000d_ Hydraulics:_x000d_ Single-stage centrifugal pump_x000d_ with cooling jacket and vertical_x000d_ pressure port 1 1/4 inch (32) male thread._x000d_ Open multi-vane wheel with a_x000d_ free passage of 10.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ triple radial seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free,_x000d_ permanently lubricated roller bearing._x000d_ _x000d_ Motor:_x000d_ Pressurized water-tight electric motor_x000d_ with 2-pole winding._x000d_ Insulation class of winding B,_x000d_ protection type IP68._x000d_ Thermocouple for temperature monitoring_x000d_ in the winding._x000d_ _x000d_ Motor cooling:_x000d_ Jacket cooling of the motor by_x000d_ conveyed liquid._x000d_ _x000d_ Materials:_x000d_ Suction strainer: Plastic PP-GF_x000d_ Impeller: Plastic PP-GF_x000d_ Motor housing: Stainless steel_x000d_ Outer housing: Plastic PP-GF_x000d_ Motor shaft: Stainless steel_x000d_ Mechan. connecting parts: Stainless steel_x000d_ Elastomers: NBR_x000d_ Shaft seals: NBR_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 12.00 m³/h_x000d_ Head Hmax: 8.00 m_x000d_ Power P1: 0.55 kW_x000d_ Power P2: 0.26 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Nominal current: 2.50 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 1 1/4 inch (32) male thread_x000d_ Weight: 5.10 kg_x000d_ Speed: 2850.00 1/min_x000d_ _x000d_ Connection cable: H07RN-F - 3G1_x000d_ Length of connecting cable: 10.00 m Pump connection: without Scope of delivery: Pump with double socket G 1 1/4 incl. integrated non-return valve, sealing ring hose connector. Connecting cable with plug, automatic float switch HOMA Nivomatik for WA version. _x000D_ Make: HOMA