TP48V15/2 DL submersible waste water pump without float

Non-floating waste water pump TP48V15/2 DL Used for pumping waste water and sewage as well as slurries. Due to the large free passage of 50 mm, they are particularly suitable for use in media with coarse solids and fiber content Passage of 50 mm, they are particularly_x000d_ suitable for use in media with_x000d_ coarse solids and fibrous content._x000d_ Ideal for the economical disposal_x000d_ in trade, industry and private_x000d_ areas._x000d_ _x000d_ DIN EN 12050-2: TÜV certified, type-tested and monitored. Max. temperature of the pumped medium: 40°C, briefly up to 60°C Operating mode: continuous operation (S1)_x000d_ with a max. number of starts_x000d_ of 15 starts/hour with submerged_x000d_ motor._x000d_ _x000d_ Design:_x000d_ Single-stage submersible motor pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics:_x000d_ Pump with horizontal_x000d_ pressure connection 2 inch (50) male thread._x000d_ Vortex impeller with a_x000d_ 50.00 mm free passage._x000d_ _x000d_ Shaft seal:_x000d_ Direction-independent_x000d_ combination of mechanical seal_x000d_ (silicon carbide/silicon carbide) and_x000d_ radial seal in oil barrier chamber._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free, permanently lubricated_x000d_ roller bearing._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor,_x000d_ oil-filled with 2-pole winding._x000d_ Insulation class of winding H,_x000d_ protection type IP68._x000d_ _x000d_ Motor cooling:_x000d_ Motor with surface cooling in_x000d_ immersion operation._x000d_ _x000d_ Materials:_x000d_ Motor housing: gray cast iron EN-GJL-250_x000d_ Pump housing: gray cast iron EN-GJL-250_x000d_ Impeller: stainless steel 1.4308_x000d_ Motor shaft: stainless steel 1.4104_x000d_ Mechanical connecting parts: stainless steel_x000d_ O-rings: NBR_x000d_ Mechanical seal (medium side): SiC / SiC_x000d_ Shaft seal ring (motor side): NBR_x000d_ _x000d_ _x000d_ Paint/coating:_x000d_ Two-component paint on an_x000d_ epoxy resin basis, RAL 9005._x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 26.00 m³/h_x000d_ Head Hmax: 11.50 m_x000d_ Power P1: 1.50 kW_x000d_ Power P2: 1.10 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 400 V_x000d_ Current type: 3.00 Ph_x000d_ Rated current: 2.50 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 2 inch (50) AG_x000d_ Weight: 22.00 kg_x000d_ Speed: 2900.00 1/min_x000d_ _x000d_ Power cable: H07RN-F - 3G1.5_x000d_ Length of power cable: 10.00 m_x000d_ Pump connection: without_x000d_ _x000d_ Scope of delivery: Pump with floor stand. Connection cable with plug. Make: HOMA