Sanistar 210 W sewage pumping station - PCM

Sanitary sewage pump Sanistar 210 W - PCM Use: Pumping of sewage and faeces, including those with coarse and fibrous components. For draining rooms below the backflow level in which sewage arises, e.g. from toilets, showers, washbasins For draining rooms below the backflow level where wastewater is produced, e.g. from toilets, sinks, showers, according to DIN 1986. Collection tank Non-rotting, gas-tight and_x000d_ odor-proof plastic container._x000d_ Inlets: DN 100 horizontal, 180 mm height_x000d_ DN 100 horizontal, 250 mm height_x000d_ DN 100 vertical, DN 40 vertical_x000d_ DN 150 horizontal, DN 150 vertical._x000d_ Pressure connection: flange DN 80 and_x000d_ flexible adapter DN 80/DN 100._x000d_ Soft-seated ball check valve integrated in the pressure connection_x000d_ soft-sealing ball non-return valve integrated in the pressure connection._x000d_ Vent connection: DN 70 vertical._x000d_ Connection for diaphragm hand pump: R 1" female thread._x000d_ Cleaning opening with screw cover._x000d_ _x000d_ Control: Electronic control unit (PCM) for controlling and monitoring all important operating functions. Pneumatic level control with dynamic pressure switch. Motor protection through Current and temperature monitoring of the_x000d_ winding. Optical operating and_x000d_ fault display. Alarm signal through_x000d_ built-in buzzer, even independently of the mains supply_x000d_ through built-in rechargeable battery (included in the scope of delivery_x000d_). Potential-free_x000d_ Collective fault message._x000d_ Direction of rotation monitoring for three-phase current,_x000d_ power plug. Diagnosis and_x000d_ operating states can be parameterized and_x000d_ queried via smartphone_x000d_ (Bluetooth) using the free_x000d_ smartphone app HOMApp:_x000d_ :_x000d_ Query of operating hours,_x000d_ switching cycles, maintenance interval,_x000d_ abnormal operating conditions,_x000d_ change in switching levels._x000d_ Plant status and data records can be_x000d_ Smartphone functions to other users_x000d_ (e.g. HOMA service centre) for diagnostic purposes_x000d_ ._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of pumping medium:_x000d_ 40°C, briefly up to 60°C._x000d_ _x000d_ Design:_x000d_ Flood-proof single lifting unit_x000d_ with control unit, collection tank and_x000d_ pump ready for connection._x000d_ _x000d_ Design of pump:_x000d_ Pump chamber integrated in the collection tank, vertical pressure connection DN 80._x000d_ Vortex impeller with a free passage of 45.00 mm. Mode of operation: Intermittent operation. Shaft seal triple radial seal. _x000d_ _x000d_ Shaft bearing: robust, maintenance-free, permanently lubricated roller bearing. _x000d_ _x000d_ Motor Water pressure-tight electric motor, with 2-pole winding. Insulation class of winding H, protection class IP68. Materials Pressure cover: gray cast iron EN-GJL-250_x000d_ impeller: gray cast iron EN-GJL-250_x000d_ motor housing: gray cast iron EN-GJL-250_x000d_ collection tank: polyethylene_x000d_ Motor shaft: Stainless steel 1.4104_x000d_ Mechan. connecting parts: Stainless steel_x000d_ O-rings: NBR_x000d_ Shaft seals: NBR_x000d_ Upper bearing: Grooved ball bearing_x000d_ Lower bearing: grooved ball bearing_x000d_ _x000d_ Technical data:_x000d_ Conveying current Qmax: 44.30 m³/h_x000d_ Conveying height Hmax: 8.00 m_x000d_ Number of pumps: 2.00_x000d_ Power P1: 1.70 kW_x000d_ Power P2: 1.30 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Rated current: 7.10 A_x000d_ Speed: 1450.00 1/min_x000d_ Starting type: Direct_x000d_ Container volume: 95.00 L_x000d_ Pressure connection: DN 80_x000d_ Weight: 97.96 kg Explosion protection: no Cutting mechanism: no Dimensions: Width: 750.00 mm Depth: 750.00 mm_x000d_ Height: 515.00 mm_x000d_ _x000d_ Connection cable: H07RN8-F PLUS - 6G1.5_x000d_ Length of connection cable: 4.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Container with 2 pumps, soft-sealing_x000d_ ball return valve,_x000d_ pressure connection with flange DN 80 and_x000d_ DN 80/DN 100 elastic adapter_x000d_ with clamps. Elastic_x000d_ connecting pieces for inlet DN 100 and_x000d_ venting DN 70 with clamps._x000d_ Pneumatic level switch._x000d_ Electronic control unit Connecting cable with plug. _x000d_ _x000d_ Make: HOMA