San.iQ cut small sewage lifting unit

Small sewage lifting unit_x000d_ San.iQ cut_x000d_ _x000d_ Use:_x000d_ Pumping of domestic sewage containing faeces_x000d_ Installation of toilet, plus_x000d_ wash basin and urinal or_x000d_ Seat-mounted washbasin, or shower, in rooms_x000d_ below the backflow level of the_x000d_ sewer (basement or_x000d_ cellar rooms), or without sufficient_x000d_ slope to the nearest wastewater collection pipe._x000d_ For the disposal of up to three_x000d_ sanitary units. Hardened stainless steel_x000d_ macerator for shredding_x000d_ faeces and toilet paper._x000d_ Water-level dependent, pneumatic_x000d_ Level control with electronic control system,_x000d_ flooding monitor, alarm signal_x000d_ and operating time monitor._x000d_ _x000d_ Collection tank:_x000d_ Non-rotting, gas- and odor-tight_x000d_ Plastic container. Horizontal WC inlet DN 100_x000d_, inlet height 180 mm_x000d_ (DIN 1387 Form A / DIN1388 Form A)._x000d_ Two lateral inlets DN 40 with_x000d_ integrated non-return valve._x000d_ Pressure connection Ø 25 (Ø 34) mm with_x000d_ built-in ball check valve._x000d_ Ventilation opening with_x000d_ active carbon filter._x000d_ _x000d_ Control: Pneumatic water-level-dependent level control with electronic control system. Flooding monitor, alarm signal, operating time monitor. DIN EN 12050-2: TÜV certified, type-tested and monitored. Max. temperature of the pumped fluid: 95°C DIN EN 12050-2: TÜV certified, type-tested and monitored. Max. temperature of the pumping medium: 35°C, briefly up to 60°C. Design Design: Ready-to-connect small lifting unit. Pump design: Single-stage submersible motor pump with horizontal pressure connection. Open multi-vane wheel with upstream cutter for chopping up solids with a free passage of 25.00 mm. Mode of operation: intermittent operation. Shaft seal triple radial seal. _x000d_ Shaft bearing: Robust, maintenance-free, permanently lubricated roller bearing. _x000d_ _x000d_ Motor Waterproof electric motor, with 2-pole winding. Insulation class of the winding B, protection class IP44. Thermal sensors in the thermal sensors for temperature monitoring in the winding _x000d_ Materials:_x000d_ Collection container: ABS plastic_x000d_ Pump housing: PP-GF plastic_x000d_ Impeller: PP-GF plastic_x000d_ Macerator: 1.4122 stainless steel_x000d_ Motor housing: Stainless steel 1.4301_x000d_ Motor shaft: Stainless steel 1.4021_x000d_ Mechan. connecting parts: Stainless steel_x000d_ Elastomers: NBR_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 6.50 m³/h_x000d_ Head Hmax: 6.50 m_x000d_ Number of pumps: 1.00_x000d_ Power input P1: 0.65 kW_x000d_ Power input P2: 0.35 kW_x000d_ Frequency: 50 Hz_x000d_ voltage: 230 V_x000d_ current type: 1.00 Ph_x000d_ nominal current: 2.80 A_x000d_ speed: 2850.00 1/min_x000d_ Starting method: direct Tank capacity: 15.00 L Pressure connection: DN 32 Weight: 7.80 kg Explosion-proof: no Cutting mechanism: yes _x000d_ Dimensions:_x000d_ Width: 237.00 mm_x000d_ Depth: 488.00 mm_x000d_ Height: 285.00 mm_x000d_ _x000d_ Connection cable: H03VV-F - 3G0.75_x000d_ Length of connection cable: 1.40 m_x000d_ _x000d_ Scope of delivery:_x000d_ Tank with pump, non-return valve,_x000d_ connection cable with plug._x000d_ _x000d_ Make: HOMA