Motor-driven construction pump with float_x000d_
HBP500/7.5 HDA_x000d_
_x000d_
Use:_x000d_
Pumping clean or dirty_x000d_
water, including water with abrasive_x000d_
Sand or mud._x000d_
Applications include cellar drainage,_x000d_
groundwater lowering, keeping_x000d_
construction sites or shafts dry,_x000d_
process water supply, use on_x000d_
Ships, emergency use in case of flooding
etc.
The flooding of the motor ensures
adequate cooling even at extremely
low water levels. Optimized
for professional use on construction sites
_x000d_
Max. temperature of the pumping medium:_x000d_
40°C._x000d_
_x000d_
Operating mode: continuous operation (S1)_x000d_
_x000d_
Design:_x000d_
Submersible motor pump with motor_x000d_
for portable and stationary_x000d_
use, consisting of:_x000d_
_x000d_
Hydraulics:_x000d_
Single-stage centrifugal pump_x000d_
with cooling jacket and vertical_x000d_
Pressure connection 4 inch (100) male._x000d_
Open multi-vane wheel with a_x000d_
free passage of 12.00 mm._x000d_
_x000d_
Shaft seal:_x000d_
Shaft seal ring in combination_x000d_
with a double-acting mechanical seal in an oil bath
Motor:_x000d_
Waterproof electric motor_x000d_
with 2-pole winding._x000d_
Insulation class of the winding F,_x000d_
protection class IP68._x000d_
From the motor_x000d_
separate cable connection compartment._x000d_
Thermocouple in the_x000d_
winding for temperature monitoring._x000d_
_x000d_
Motor cooling:_x000d_
Jacket cooling of the motor by_x000d_
conveyed medium._x000d_
_x000d_
Materials:_x000d_
Motor housing: stainless steel_x000d_
Upper motor bearing housing: aluminum_x000d_
Lower motor bearing housing: gray cast iron GJL_x000d_
Pressure cover / diffuser: gray cast iron GJL_x000d_
Pump housing: gray cast iron GJL_x000d_
Impeller: cast iron GJS_x000d_
suction strainer: stainless steel_x000d_
motor shaft: stainless steel_x000d_
outer jacket: stainless steel_x000d_
screws: stainless steel_x000d_
O-rings: NBR_x000d_
Mechanical seal: SiC, ceramic_x000d_
Shaft seal: NBR_x000d_
_x000d_
Technical data:_x000d_
Flow rate Qmax: 90.00 m³/h_x000d_
Head Hmax: 41.00 m_x000d_
Power P1: 9.00 kW_x000d_
Power P2: 7.50 kW_x000d_
Frequency: 50 Hz_x000d_
Voltage: 400 V_x000d_
Current type: 3.00 Ph_x000d_
Rated current: 15.00 A_x000d_
Starting method: Direct_x000d_
Pressure connection: 4 inch (100) male thread_x000d_
Weight: 113.00 kg_x000d_
Speed: 2850.00 1/min_x000d_
Pump switch: with external float
Connection cable: H07RN8-F4G
Length of connection cable: 20.00 m
Pump switch: with external float
Scope of delivery:_x000d_
Pump with 20.00 m connection cable and_x000d_
STORZ coupling._x000d_
Switchgear with motor protection,_x000d_
HAND switch and mains plug._x000d_
_x000d_
Make: HOMA
Shipping weight: |
113,00 kg
|