Motor-driven construction pump with float_x000d_
HBP500/7.5 DA_x000d_
_x000d_
Use:_x000d_
Pumping clean or dirty_x000d_
water, including water with abrasive_x000d_
Sand or mud._x000d_
Applications include cellar drainage,_x000d_
groundwater lowering, keeping_x000d_
construction sites or shafts dry,_x000d_
process water supply, use on_x000d_
Ships, emergency use in case of flooding
etc.
The flooding of the motor ensures
adequate cooling even at extremely
low water levels. Optimized
for professional use on construction sites
_x000d_
Max. temperature of the pumping medium:_x000d_
40°C._x000d_
_x000d_
Operating mode: continuous operation (S1)_x000d_
_x000d_
Design:_x000d_
Submersible motor pump with motor_x000d_
for portable and stationary_x000d_
use consisting of:_x000d_
_x000d_
Hydraulics:_x000d_
Single-stage centrifugal pump_x000d_
with cooling jacket and vertical_x000d_
Pressure connection 6 inch (150) male._x000d_
Open multi-vane wheel with a_x000d_
free passage of 20.00 mm._x000d_
_x000d_
Shaft seal:_x000d_
Shaft seal ring in combination_x000d_
with a double-acting mechanical seal in an oil bath
Motor:_x000d_
Waterproof electric motor_x000d_
with 2-pole winding._x000d_
Insulation class of winding F,_x000d_
protection class IP68._x000d_
From the motor_x000d_
separate cable connection compartment._x000d_
Thermocouple in the_x000d_
winding for temperature monitoring._x000d_
_x000d_
Motor cooling:_x000d_
Jacket cooling of the motor by_x000d_
conveyed medium._x000d_
_x000d_
Materials:_x000d_
Motor housing: Stainless steel_x000d_
Upper motor bearing housing: Aluminum_x000d_
Lower motor bearing housing: Gray cast iron GJL_x000d_
Discharge cover / diffuser: Gray cast iron GJL_x000d_
Pump housing: cast iron GGG 40 (GJS-400-15)_x000d_
Impeller: cast iron GJS_x000d_
Suction strainer: stainless steel_x000d_
Motor shaft: stainless steel_x000d_
Outer jacket: stainless steel_x000d_
Screws: stainless steel_x000d_
O-rings: NBR_x000d_
mechanical seal: SiC, ceramic_x000d_
shaft seal ring: NBR_x000d_
_x000d_
Technical data:_x000d_
Flow rate Qmax: 127.00 m³/h
Head Hmax: 32.00 m
Power P1: 9.00 kW
Power P2: 7.50 kW
Frequency: 50 Hz
Voltage: 400 V
Current type: 3.00 Ph
Rated current: 15.00 A
Starting type: Direct
Pressure connection: 6 inch (150) AG
Weight: 116.00 kg
Speed: 2850.00 1/min
Pump connection: with external float
Connection cable: H07RN8-F4G
Length of connection cable: 20.00 m_x000d_
Pump circuit: with external float_x000d_
_x000d_
Scope of delivery:_x000d_
Pump with 20.00 m connection cable and_x000d_
STORZ coupling._x000d_
Switchgear with motor protection,_x000d_
HAND switch and mains plug._x000d_
_x000d_
Make: HOMA
Shipping weight: |
116,00 kg
|