Carrying box with pump and hose flood set - C150 WA

Carrying box with pump and hose_x000d_ flood set - C150 WA_x000d_ _x000d_ Use:_x000d_ In case of flooding, for pumping_x000d_ clean or dirty_x000d_ Water, including water containing solids_x000d_ 20 mm. Cellar drainage,_x000d_ keeping pits, shafts,_x000d_ rooms dry. Disposal of waste water in_x000d_ cellar rooms. Lowering of_x000d_ Surface water. Emergency response to_x000d_ flooding. Water extraction from_x000d_ watercourses or reservoirs for_x000d_ irrigation._x000d_ _x000d_ The flood set - C150 WA consists of:_x000d_ _x000d_ - Submersible waste water pump_x000d_ Type Bully C150 WA with automatic_x000d_ float switch_x000d_ - 10 m fabric hose Ø 38 mm with_x000d_ C-coupling_x000d_ - Carrying basket for transportation, storage_x000d_ and as mud protection when_x000d_ the pump is in operation_x000d_ _x000d_ Pump with lever-operated float switch,_x000d_ automatic flushing device,_x000d_ Stainless steel motor shaft with ceramic-_x000d_ coated sealing surface, automatic_x000d_ venting with additional_x000d_ venting screw, removable suction strainer_x000d_ for shallow suction of residual water._x000d_ _x000d_ DIN EN 12050-2: TÜV certified,_x000d_ type-tested and monitored._x000d_ _x000d_ Max. temperature of pumped liquid:_x000d_ 35 C, briefly up to 60 C._x000d_ _x000d_ Operating mode: continuous operation (no)_x000d_ _x000d_ Design:_x000d_ Single-stage submersible pump for_x000d_ portable and stationary_x000d_ use._x000d_ _x000d_ Hydraulics: Single-stage stainless steel centrifugal pump with cooling jacket and bottom discharge connection 1 1/4 inch (32) male thread. Open multi-vane wheel with a free passage of 20.00 mm._x000d_ _x000d_ Shaft seal:_x000d_ 3-fold radial seal._x000d_ _x000d_ Shaft bearing:_x000d_ Robust, maintenance-free,_x000d_ lubricated antifriction bearing._x000d_ _x000d_ Motor:_x000d_ Water pressure-tight electric motor_x000d_ with 2-pole winding._x000d_ Insulation class of the winding F,_x000d_ protection type IP68._x000d_ Thermocouple for temperature monitoring_x000d_ in the winding._x000d_ _x000d_ Motor cooling:_x000d_ Partial submersion of the motor in_x000d_ the pumped liquid._x000d_ _x000d_ Materials:_x000d_ Suction strainer: plastic PP-GF_x000d_ Impeller: plastic PP-GF_x000d_ Motor housing: corrosion-resistant stainless steel_x000d_ Outer housing: plastic PP-GF_x000d_ Motor shaft: corrosion-resistant stainless steel_x000d_ Mechanical connecting parts: Stainless steel_x000d_ Elastomers: NBR_x000d_ Shaft seals: NBR_x000d_ _x000d_ Technical data:_x000d_ Flow rate Qmax: 12.50 m³/h_x000d_ Delivery height Hmax: 10.50 m_x000d_ Power P1: 0.75 kW_x000d_ Power P2: 0.38 kW_x000d_ Frequency: 50 Hz_x000d_ Voltage: 230 V_x000d_ Current type: 1.00 Ph_x000d_ Rated current: 3.50 A_x000d_ Starting type: Direct_x000d_ Pressure connection: 1 1/4 inch (32) AG_x000d_ Weight: 11.23 kg_x000d_ Speed: 2850.00 1/min_x000d_ _x000d_ Power cable: H07RN-F - 3G1_x000d_ Length of power cable: 10.00 m_x000d_ _x000d_ Scope of delivery:_x000d_ Pump with STORZ C-coupling,_x000d_ connection cable with plug,_x000d_ automatic lever arm float switch_x000d_ HOMA Nivomatik._x000d_ carrying basket, 10 m C-hose._x000d_ Float locking clip. _x000d_ Make: HOMA