Technical Data
Product Information
| Item information | Value |
|---|---|
| GTIN: | 4050808114337 |
Product Description
BWT perla one
Manufacturer: BWT
Simplex soft water system based on ion exchange principle. During a regeneration process, untreated inlet water is available.
Regeneration is triggered volumetrically (depending on the amount of water).
This ensures that no remaining soft water is discarded during regeneration.
The operating mode is consumption-dependent.
The adaptive sequential operating mode enables maximum water availability and minimizes stagnation.
The regeneration time is therefore set for nighttime
– a period when water demand is typically low
.
BWT perla one automatically determines the required capacity
via continuous evaluation of a two-week consumption period
.
Depending on capacity consumption, the product performs proportional regeneration or a hygiene flush at the regeneration time
.
If the capacity is not exhausted within
72 hours, the control system triggers a
regeneration (stagnation management)
A BWT mineral
dosing device can be connected at any time using a plug connector
.
With BWT DES (Digital Eco System)
, BWT perla one has extensive connectivity
- WLAN/LAN (LAN via RJ45 socket)
- GSM connection to the BWT server for
full functionality & database update
- APP:
BWT@home
- Connection to the BWT Hydromaps database
for automatic determination of the water hardness at the installation site
- ZLT connector: in the event of a fault or power failure, the contact is open
(max. contact rating 24 VDC, 0.5A)
The AQA Safe valve closes the waste water valve in the event of a power failure
.
Technical data:
- Nominal connection size DN 32
- Nominal capacity according to DIN EN 14743
1.6 mol or 9 cbm x degrees dH
- Peak flow rate with closed
mixing max. 3.2 cbm/h
- Nominal pressure PN 10 bar
- Operating pressure min./max. 2-8 bar
- Pressure loss at operating flow rate 1.0 bar
- Residential units 1 - 5
- Persons 2 - 12
- Filling quantity of ion exchange material 6.2 l
- Regenerant supply 32 kg
- Regenerant consumption per 100%
Regeneration approx. 0.26 kg
- Rinse water consumption at 4 bar approx. 32 l
- Regeneration time 45 minutes
- Water temperature min/max. 5-25 degrees
- Ambient temperature min/max. 5-40 degrees
- Mains connection 230 / 50-60 V/Hz
- Device voltage 18 V DC
- Connected load during operation 5.6 W
- Connected load during regeneration max. 40W
- Protection class IP 54
- Operating weight approx. 76 kg
- Shipping weight 32 kg
- Drain connection min. DN 40
Order no.: 11433
BWT Wassertechnik GmbH, Industriestr. 7, 69198 Schriesheim, Baden-Württemberg, Deutschland, bwt@bwt.de, https://bwt.de
