Proportional dosing of exaliQ mineral solutions to protect drinking water pipes from corrosion in residential buildings. For mineral solutions 3 l. An electronic level monitoring system switches the pump off when the dosing tank is empty. This protects the pump from running dry. The operating status of the dosing system is indicated by means of LED lights on the control panel. The green LED ring also provides information about the status of the exaliQ and flashes to indicate a low or empty message or a fault. The electronic self-monitoring system prevents impermissible overdosing in the event of faults by switching off the pump. The date, the amount of water that has flowed through and the data can be read out via a USB interface for approx. 12 months using a USB stick and printed out in tabular form using a printer. - DVGW registered -
consisting of:
- 1 contact water meter with water meter screw connections, approx. 1.5 m long pulse cable with hall effect sensor,
- Dosing point with non-return valve.
- 1 dosing device
- 1 metering valve
- 1 holder with spacer
- 1 power supply 230 V - 12 V with approx. 1.5 m long connection cable.
- 1 operating manual
Technical data:
- Nominal connection diameter: DN 25
- Operating range: 6 cbm/h
- Nominal pressure: 10 bar (Ü)
- Maximum water temperature: 30 degrees C
- Power connection: 230 V/50 Hz
- Operating voltage: 24 V/50 Hz
- Dosage quantity: 100 ml/cbm
- Dosing sequence: 0.33 l
- Wall distance to pipe center: 55 mm
- Height of dosing system: 425 mm
- Extension height of 3-liter bottle: 250 mm
| Shipping weight: | 8,00 kg |
There are no reviews yet.
