Clage MCX 7 small instantaneous water heater 6.5 kW - 400V
The MCX small instantaneous water heater from Clage fits discreetly into any washbasin situation. It regulates the heating power electronically to heat the water to the required temperature. You can choose from three desired temperatures and no longer need to add water to the tap. Since the water is heated immediately as it flows through, the Clage small instant water heater is very energy efficient.
- Dimensions (height x width x depth): 13.5 x 18.6 x 8.7 cm
- Mini electronically controlled undersink water heater for supplying one washbasin
- Power electronics for controlling the heating power for demand-oriented water heating (ecoadapt)
- Control panel for setting the maximum outlet temperature to 35°C, 38°C or 45°C
- Central cover screw, water quantity setting and rating plate under a removable panel
- Efficient and maintenance-friendly IES® bare-wire heating system with replaceable heating cartridge
- New flow technology for an optimized water jet with economical water consumption
- Special aerator with flow rate controller for use in aerator sleeves M22/M24
- Connection set with T-piece and flexible pressure hose for a corner valve included in the scope of delivery
- 6.5kW 400V with fixed connection
Applications:
- Individual supply: washbasin (e.g. in guest toilet)
- Commercial sanitary rooms
- Kitchenette
- For non-contact taps
- For standpipes
- For low flow water pressure
- For reheating (solar-compatible)
Technical properties:
|
Design:
|
pressure-resistant
|
|
Permissible operating pressure [ MPa (bar) ]:
|
1(10)
|
|
Water connections (screw connections):
|
G 3/8"
|
|
Temperature selection range [°C]:
|
35 - 38 - 45
|
|
Hot water output at t = 25 K (1*) [l/min ]:
|
3.7
|
|
Initial water quantity / max. flow rate (2*) [l/min] :
|
1.5 / 3.7
|
|
Rated power [kW]:
|
6.5
|
|
Voltage [2~ / PE 400 V AC]:
|
Fixed connection
|
|
Rated current [A]:
|
16
|
|
Required cable cross-section [mm2 ]:
|
2.5
|
|
IES® bare-wire heating system:
|
yes
|
|
IES® bare-wire heating system:
|
yes
|
|
Suitable for solar heating, suitable for reheating (inlet temperature = 70 C):
|
yes
|
|
VDE certification mark / protection class:
|
yes / IP 25
|
|
Specific water resistance at 15 °C [Ocm] :
|
1100
|
|
IES® bare wire heating system:
|
yes
|
|
Nominal capacity [liters]:
|
0.2
|
|
Weight when filled with water [kg]:
|
approx. 1.5
|
|
Dimensions (height & times; Width & times; Depth) [cm]:
|
13.5 x 18.6 x 8.7
|
1*) Temperature increase from e.g. 15°C to 40°C
2*) Flow rate limited for optimum temperature increase, can be adjusted by adjusting the water volume
ATTENTION: The offered article may only be installed by the respective network operator or by a plumbing company registered in the network operator's plumber directory.
Instructions: https://www.clage.de/de/mediacenter
| Shipping weight: | 1,79 kg |
There are no reviews yet.
