Carrying box with pump and hose
Flood Set Pro HBP503 WA
Use:
Pumping clean or dirty
water, including water with abrasive
Sand or mud._x000d_
Drainage applications on construction sites._x000d_
The plastic box can be connected to the_x000d_
basic equipment of the_x000d_
construction vehicle._x000d_
The flooding of the motor ensures_x000d_
adequate cooling even at extremely_x000d_
low water levels. Optimized for_x000d_
professional use on construction sites._x000d_
_x000d_
The flood set Pro HBP503 WA consists of:_x000d_
_x000d_
- Submersible waste water pump
type HBP503 WA with automatic
float switch
- 10 m fabric hose with
C-clutch
- carrying basket for transport, storage
and as sludge protection when_x000d_
the pump is in operation_x000d_
_x000d_
Pump with automatic float switch_x000d_
HOMA Nivomatik, HOMA switchgear WA1,_x000d_
motor protection, AUTO-manual switch_x000d_
and mains plug._x000d_
_x000d_
DIN EN 12050-2: TÃœV certified,_x000d_
type tested and monitored._x000d_
_x000d_
Max. temperature of the pumped medium:_x000d_
40 degrees C,_x000d_
_x000d_
Operating mode: continuous operation (no)_x000d_
_x000d_
Design:_x000d_
Single-stage stainless steel centrifugal pump with_x000d_
cooling jacket_x000d_
_x000d_
Hydraulics:_x000d_
Pump with top, vertical_x000d_
pressure connection 2 inch (50) male thread._x000d_
Open multi-vane wheel with a_x000d_
free passage of 6.00 mm._x000d_
_x000d_
Shaft seal:_x000d_
Shaft seal ring in combination_x000d_
with double-acting mechanical seal_x000d_
ceramic/carbon/SIC in oil bath._x000d_
_x000d_
Shaft bearing:_x000d_
Strongly dimensioned chrome steel motor shaft,_x000d_
permanently lubricated roller bearings_x000d_
_x000d_
Motor:_x000d_
Water pressure-tight electric motor_x000d_
with 2-pole winding._x000d_
Insulation class of the winding F,_x000d_
protection type IP68._x000d_
Cable connection compartment separated from motor._x000d_
_x000d_
Motor cooling:_x000d_
Jacket cooling of motor by_x000d_
pumped medium._x000d_
_x000d_
Materials:_x000d_
Bearing housing: Polypropylene_x000d_
Motor housing: Stainless steel_x000d_
Upper motor bearing housing: Aluminum_x000d_
Lower motor bearing housing: Gray cast iron GJL_x000d_
Pressure cover / diffuser: Gray cast iron GJL_x000d_
Pump housing: gray cast iron GJL_x000d_
impeller: cast iron GJS_x000d_
suction strainer: stainless steel_x000d_
motor shaft: stainless steel_x000d_
outer jacket: stainless steel_x000d_
screws: stainless steel_x000d_
O-rings: NBR_x000d_
Mechanical seal: SiC, ceramic_x000d_
_x000d_
Technical data:_x000d_
Flow rate Qmax: 15.50 m³/h_x000d_
Head Hmax: 12.00 m_x000d_
Power P1: 0.67 kW_x000d_
Power P2: 0.40 kW_x000d_
Frequency: 50 Hz_x000d_
Voltage: 230 V_x000d_
Current type: 1.00 Ph_x000d_
Rated current: 3.00 A_x000d_
Starting type: Direct_x000d_
Pressure connection: 2 inch (50) male thread_x000d_
Weight: 20.00 kg_x000d_
Speed: 2850.00 1/min_x000d_
_x000d_
connection cable: H07RN8-F4G1_x000d_
length of connection cable: 10.00 m_x000d_
_x000d_
Scope of delivery:_x000d_
Pump with STORZ C-coupling,_x000d_
Connection cable with plug,
automatic float switch
HOMA Nivomatik.
Carrying basket, 10 m C-hose.
_x000d_
Make: HOMA
Shipping weight: |
20,00 kg
|